1 / 4
Archery target pins for straw and foam bosses — zdjęcie 1
1 / 4

Archery target pins for straw and foam bosses

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

4 pins (one for each corner of the target). and a 5th for the windy side for foam targets

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I've seen many pins available but I wanted one that was as easy to pull out as to push in.

Pull out as you would an arrow (hand on the target by the pin) and pull with a finger in the handle.

Print in place, no supports needed.

The foam pins are ribbed to help them stay in place in windy conditions.

Tagi