sidecar racing motorcycle update

I found a picture of my friend sidecar racing......

so I thought it would make a cool model....

This is a surprisingly sturdy model. I used tree supports with 40% overhang and the only damage was a few of the spokes in the wheels when I removed the supports.

really quite pleased...vroom vroom

repaired wheel and mudguard

I have also added the hue forge picture with the layer description ...

your filament does not have to be exactly the same ,(being as the picture is black and white), just use what you have

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 233.33x175mm in size

 You may print at higher layer heights below the Base Thickness of 0.48mm

 The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

                #0f181d PLA sunlu my sunlu black  Transmission Distance: 0.3

                #394c68 PLA sunlu my sunlu grey  Transmission Distance: 1.9

                #a1a1a1 PLA bambu lab my blue grey  Transmission Distance: 2.1

                #e2dedb PLA PolyLite White  Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

                Start with sunlu my sunlu black

                At layer #7 (0.64mm) swap to sunlu my sunlu grey

                At layer #11 (0.96mm) swap to bambu lab my blue grey

                At layer #18 (1.52mm) swap to PolyLite White for the rest.