Mosaic Filament Spool Holder Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleeve that goes under Mosaic branded spools to prevent them getting caught on the Prusa injection moulded holder.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A sleeve that goes under Mosaic branded spools to prevent them getting caught on the Prusa injection moulded holder and other similar holders. The Mosaic branded spools intended for use with their printers such as the Array are keyed on one side. We had an excess of these spools and wanted to use them on our Prusas, but the keyed side kept getting caught on the injection moulded spool holder's gaps so that's rectified by fitting this adapter of sorts under the spool as it will keep the diameter constant and give the holder something to slide against.
It's just a cylinder of specific size designed to be printed in vase mode. Use 0.2 mm layers with 0.8 mm extrusion width on an 0.4 mm nozzle. You may need a brim for better adhesion or you might be able to get away without one. Print with no bottom layers.
This model was created using Fusion 360.