1 / 4
Logitech C910 Camera Mount for Prusa MK3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the Logitech C910 webcam for the Prusa MK3 to be used with PrusaConnect/Octoprint on a Pi.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 1
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mount for the Logitech C910 webcam for the Prusa MK3 to be used with PrusaConnect/Octoprint on a Pi. All parts can be printed in PLA, settings don't matter too much but I would use at least 3 walls for rigidity. You will need a sufficiently long M3 screw and nut to hold the webcam in place. You may need to fix the peg to prevent it from being too loose with some adhesive, I used hot glue.
This model was created using Microsoft 3D Builder by modifying the original 2 STL files.