Shakra from hollow knight silksong
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
statue of Shakra from hollow knight silksong zbout 12cm tall
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
stuff you need
superglue
paint
notes on printing
All files are separated in a way to make painting/printing with different colors easier.
The arms antennas and legs can be a bit tricky since they are pretty thin, i suggest a well done calibration.
The "base" and "papers" models have been rotated 45° for less visible layer lines, if you want you can print them flat but the layers will be quite noticeable
notes on assembly
It is easier to paint everything while it is in pieces
It is easier to glue the arms at the right angle after the quill and the body are in place
if there are any problems with the model please leave a comment so i can fix them