1 / 4
adjusted rudder - Swamp boat by RCWeinstadt
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix from "Swamp boat by RCWeinstadt" I changed the rudder so that the control arm is at the same height as the servo…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 835
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Remix from "Swamp boat by RCWeinstadt"
I changed the rudder so that the control arm is at the same height as the servo arm.
There are also holes at the pivot point for convenient mounting and a hole in the control arm.
Holes are designed for a 1mm rod
Category: R/C Vehicles
