1 / 11
spacer for coreless motor for PROPEL — zdjęcie 1
1 / 11

spacer for coreless motor for PROPEL

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I've found replacement motors for my propel X-Wing and PROPEL TieFighter Model but these motors are too small to fit…

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I've found replacement motors for my propel X-Wing and PROPEL TieFighter Model but these motors are too small to fit exactly the housing of the RC-models hence I decided to model a spacer the motor fits in. All in all it costs me about 5€per motor/model. I also added the cutouts so that the heat can exit the plastic (take care to assemble them correctly).

the propeller also also doesn't fit the shaft of the smaller motor but a small plastic-tube (removed from the electronic cables of the previous/damaged motor) did a perfect job.

I've updated the CAD-model so that the spacer perfectly slides into the rails of the motor-housing and I also added a small cut for the O-ring. (v6)

the old v2 should not be used but I keep it here for sonwload because maybe it becomes handy when it comes to the speederbike.

I really hope you are as happy as I am that the X-Wing is airborn again.

Category: R/C Vehicles

Tagi