Air Purifier for Snapmaker U1 or other printers with such an enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to bulit a air purifier that is using to use a bigger filter. This would reduce the pressure you need to press
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I decided to bulit a air purifier that is using to use a bigger filter. I don't wanted to use the tiny bentobox solutions. Also I mostly printing PLA and PETG so I want to get the hot air out of the enclosure.
This bigger Filter would reduce the pressure you need to apply via the fan to the filter because the surface is bitter and also it should increase the lifespan of the filter.
Also it should reduce the noise of the fan because you can run it slower.
I used an Arctic P12 PRO. For a fan you should look for one which is making a good static preassure.
Normal fans for pushing air out of a PC enclosure are not the best choice for it.
Tha acrylic plate from my enclosure has 4mm and I used M4 30mm screws to mount it.
4x M4 30mm (mounting air purifier)
4x M4 20mm (filter cover)
8x Heated Inserts
1x 120mm Fan
1x 3 stage Filter for Afloia Q10 Luftreiniger / Air Purifier (17,1 x 15,9 x 4,5cm)