E3D Titan - Palette 2 Extruder Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of the E3D Titan Extruder Clip for the Palette 2/Pro's output tube. I found xile6's version but did not…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My version of the E3D Titan Extruder Clip for the Palette 2/Pro's output tube. I found xile6's version but did not like the Titan's bowden tube being the only support, so I made this version from MosaicResources'. Similar to xile6's version, insert a small piece of bowden tube into the Titan's idler arm, cut to about 10mm above the top of the arm and then slide this clip over the bowden tube. Use an M3x4 button cap screw on each side of the clip to secure and insure that it won't come dislodged from the extruder. They should fit just underneath the lip of the injection molded edges of the idler arm.
Uploaded 3 versions. In the process of testing the Clearanced one now to see how it goes. The Clipped one should also work, but not sure how well the clip will actually work to hold the cap on as I have yet to print this version. The last version probably wont work for anyone without some manual modification.
Category: 3D Printer Accessories