C.U.P.S.: Connectable Units for Pencil Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect the cups in a row and add more centre sections whenever your pencil collection grows.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made C.U.P.S. because my kids' coloured pencils had outgrown a single cup. It uses two end pieces and a repeatable middle unit, so the organiser can grow as their collection grows.
Printing each cup in a different colour makes it easier to group the pencils and find the right one. The cups can also hold pens, markers, brushes, and other school supplies.
The side connectors hold everything together without screws or glue. Each part measures approximately 79.5 x 50 to 52 x 70 mm. Print the parts upright with the flat bottom on the build plate. Supports are not needed.
Before printing a full set, test two parts to check the connector fit on your printer.
Files:
01_Left_End_PRINT_1x.stl
02_Center_Module_PRINT_Nx.stl
03_Right_End_PRINT_1x.stl