MMU3 slim buffer coreone sidewindow mount v1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small bracket/mount to be able to mount specifically the mmu3 buffer by @bluex
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I have been using the MMU3 Buffer by @bluex found below but I needed a way to mount it to the core one to try and keep things more self contained.
I designed a simple d bracket for the buffer that can be mounted on the side window of the core one. You need to print 3 brackets and then pull out the 3 nylon rivits holding the side window on to the core one one at a time and using an m3x8 screw and nut secure the brackets to the points where the nylon rivits were located. Once all three are in place you can simply slide the buffer through the brackets.