1 / 2
Gridfinity Trays for SN-58B Crimping Pliers + Die Set — zdjęcie 1
1 / 2

Gridfinity Trays for SN-58B Crimping Pliers + Die Set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gridfinity trays for the SN-58B crimper: one for the pliers, one with slots for all 7 interchangeable dies

Ocena
0 / 5
Polubienia
0
Pobrania
15
Wydruki
0
Wyświetlenia
50
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

Gridfinity Storage for SN-58B Crimping Pliers & Die Set

Keep your SN-58B crimping tool and its interchangeable dies organized and always within reach on your Gridfinity workbench.

WHAT'S INCLUDED

  • Pliers tray: a custom-fit slot that holds the SN-58B crimper securely, with room to grab it easily.

  • Die tray: individual slots for each die. The kit comes with 8 dies total — 7 in the box plus one pre-installed in the pliers — and the tray has 2 extra empty slots in case you buy additional dies separately.

Die overview:

  • SN-58B — 0.25–1.5 mm² (24–16 AWG) — screw / spring terminal blocks

  • SN-02C — 0.25–2.5 mm² (22–14 AWG) — pre-insulated terminals

  • SN-06WF — 0.25–6.0 mm² (24–10 AWG) — ferrules (tube)

  • SN-2546B — 2.5–6.0 mm² — MC4 solar connectors

  • SN-2549 — 0.08–1.0 mm² (28–18 AWG) — non-insulated terminals

  • SN-6 — 0.5–6.0 mm² — non-insulated terminals

  • SN-03H — 1.07–4.52 mm — coaxial cable

Each die clicks into its own pocket, so nothing rattles around in a drawer and you can instantly see if a die is missing.

COMPATIBILITY

Modeled after the Chinese Lion Rage SN-58B kit. Should also fit pliers from other manufacturers sold under the SN-58B name, but die dimensions may vary slightly between sellers — check before printing if your set is from a different vendor.

Standard Gridfinity 42 x 42 mm footprint, compatible with any Gridfinity baseplate or bin system.

PRINT SETTINGS

  • 0.2 mm layer height

  • 2 walls / 10% infill

  • No supports needed

  • PLA or PETG

Tag your makes — I'd love to see it on your bench!

Tagi