1 / 4
Cable Roller Repair Angle - Reparatur Aufwickler für Kabeltrommel / Leitungsroller — zdjęcie 1
1 / 4

Cable Roller Repair Angle - Reparatur Aufwickler für Kabeltrommel / Leitungsroller

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Repair part to fix the winding part of a cable roller / cable drum

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A bit of a special thing - but maybe it helps somebody:

I have several of the (unbranded, but common) cable rollers as shown in the photo. The "winding section" for the plug end of the cable tends to fail - one of the "ears" breaks off and then the thing is useless.

So I designed these angle-section pieces that get glued to the "winding section" to hold the "ears"inplace.They can be added after the damage but also preventatively.

I print this just in PLA. For glueing, I use the elastic plastic adhesive shown on the last photo ... it is sometimes available at the German discounter NORMA and holds really good.

Tagi