Filament Swatch Test Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple snap-on lid box where the rack is also the box bottom. Holds up to 100 cards.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
I was immediately a fan of the Filament Card Test by PolyNova and have created samples for all my filaments. But needed a way to store and transport all the filament swatches I had created. Originally I took the Bento Box Design from GreyShark and modified it to be a simpler box, but when I ran out of slots from the original design, instead of printing a 2nd box, I decided to model my own.
This box uses the same card holder design from the Bento Box design, but now holds up to 100 cards (50 card version also available). One of the biggest annoyances for me was getting the rack out of the box itself. So for this design, the card holder rack IS the bottom of the box now.
With a simple snap-on lid and cutouts for finger holes to remove the lid, this one should hold me a few more months until my filament addition catches up to the box limits. 🤣
Print Settings
Layer Height: 0.2mm
Infill : 15%
Supports: None
Materials Tried: PLA