Samsung Gear S2 SM-R720 – Firmware Flashing Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed flashing dock for the Samsung Gear S2 SM-R720. Designed and successfully tested.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a 3D-printed docking station I designed to help flash and recover the Samsung Gear S2 SM-R720 by providing stable access to the watch's internal connection points.
I originally created it to recover my own Gear S2, which needed to be connected directly for firmware flashing. Making reliable contact with the small pads using jumper wires by hand was difficult and unstable, so I designed this dock to hold the watch securely while making the required connections.
The dock was tested in a real firmware recovery and worked successfully.
Purpose
The dock helps to:
Hold the Gear S2 securely during flashing
Keep the watch in a stable and repeatable position
Provide easier access to the internal contact points
Connect jumper wires without having to hold everything by hand
Reduce the risk of losing contact during the flashing process
It can be useful for recovering a soft-bricked Gear S2, a watch stuck in a boot loop, or other situations where direct access is required for firmware flashing.
Printing
Recommended settings:
Material: PLA or PETG
Layer height: 0.20 mm
Infill: approximately 20%
Supports: Required
No special material is necessary. I printed and tested the design specifically for this application.
Important
This model is a mechanical support/docking station only. Jumper wires, flashing hardware/software and firmware are not included.
The dock was designed and tested with the Samsung Gear S2 SM-R720. Compatibility with other Gear S2 variants has not been verified.
Disclaimer
Firmware flashing and direct electrical connections to the watch involve a risk of damaging the device if performed incorrectly.
Always verify the correct pinout and connections before applying power or starting the flashing procedure.
Use at your own risk.
