Vacuum press Jig for gluing Bridge of (Classical) guitar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this vacuum membrane Jig creates force to strongly hold the bridge without the pressure to soundboard!!!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This model was specially designed for vacuum clamping of classical guitar bridge. Where the membraine create force to strongly hold the bridge without the preassure to soundboard. I used 25 M6x16mm screws and I created threads directly to plastic. there is also possibility to recreate my model for threaded inserts but it is not nessesary because screws hold well in plastic. For vacuum connection I used pneumatic G1/4" to 6mm tube fitting. thread G1/4" is also directly threaded to plastic. there is used rubber membrane. for bottom sealing is used 8x8mm self adhesive Black EPDM 500kg/m3.