1 / 3
MG996R Servo Nozzle Brush for 2020 Extrusion — zdjęcie 1
1 / 3

MG996R Servo Nozzle Brush for 2020 Extrusion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An MG996R based servo nozzle brush for 2020 extrusion

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
90
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Most servo nozzle brushes use the small SG90 servo and are designed for the VORON V0's 1515 extrusion. This servo nozzle brush is for 2020 extrusion, and uses the larger, higher torque MG996R metal gear servo.

Secure the servo to the mount using the self tapping screws that came with your servo, and then route the cable through the channel like in the pictures. Mount the whole assembly to your extrusion using two M5x8 button head cap screws, and two M5 T-nuts.

Do your firmware config at this point, and ensure the servo can travel 90 degrees. Attach the nozzle brush arm to the servo at this point, and secure it using an M3x6 button head cap screw and a washer. 

The mount is designed to use a Bambu Lab A1 style adhesive-backed nozzle brush. These are the exact ones I used:

https://www.amazon.co.uk/dp/B0FSKQXSCC

STEP files for the two individual components have been provided, and a full assembly for your CAD needs.

Servo CAD model from https://grabcad.com/library/mg996r-servo-3