PTM60 Torch Holder For Langmuir Crossfire Pro CUT60
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Machine Torch mount for my Primeweld CUT60 PTM-60 on Langmuir Crossfire Pro CNC Plasma Table
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is my machine torch mount for my Langmuir Crossfire Pro CNC plasma cutter, using the primeweld CUT60 with PTM-60 Machine Torch (https://primeweld.com/products/cnc-ptm-ipt-plasma-cutter-torch-20-cable-euro-connection) I printed out of Siraya PPA-CF with 5 walls and 50 percent cubic infill (225g) I made the clamp holes ready to hand tap for M5 bolts (probably worth drilling with a 4.2 bit to account for shrinkage), the machine mounting bolts recommended are 1/4-20 x 3/4, I believe the model should open in the correct orientation otherwise refer to the attached screenshot of how i printed.
