Ord Bot Hadron Webcam/Light Mount X-Axis Tensioner Mash Up
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is my mash up of Ord Bot X-Axis Idler Belt Tensioner and Hadron Ord Bot Handy Cam / IP Camera holder to create a…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is my mash up of Ord Bot X-Axis Idler Belt Tensioner and Hadron Ord Bot Handy Cam / IP Camera holder to create a mounting arm for led panel and usb webcam for use with my Raspberry Pi running OctoPrint. I thinned down and simplified the links as I was not supporting the same amount of weight as predecessor's design. Integrated mounting bracket into the Ord Bot X-Axis Idler Belt Tensioner to avoid bolting to axis plate.
Printed but not yet installed due to bolt availability. I had to drill out the holes in the hinge connections for friction free movement. Use M4x50 (or longer) and M4 nuts (press fit into nut traps) to connect links to bracket and each other. Use M5x8 bolts and t-nuts to mount bracket to X-Axis and M4x20 bolts and M4 nuts for tensioning bolts as described in predecessor's description.
Category: Other