NanoVNA-H Hard Case Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjusted top geometry and reduced height of the bottom.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Changes from the original:
Bottom height reduced by removing the pocket under the VNA.
Passthrough added from VNA to the storage area so that the lanyard can stow easily.
Extra area available between the SMA connectors by removing the ramped section (easier to extract with a finger).
Top geometry updated to enclose the general storage area but also contain any vertical movement of the VNA or calibration connectors.
Generally redid the curved sections to have a proper radius instead of low resolution polygons.
Added bump to reduce the VNA travel when its sitting in the pocket.
Chamfer the outer case edges.
The holes for the M3 hardware are unmodified. You will need to drill them out based on how you want to use the hardware. I used M3x30 bolts threaded into the material (drill out thread sections with 7/64" and passthrough sections with 1/8") but you can use M3x35 with a nylock nut (drill all interfaces with 1/8").