Sorbothane Vibration Isolator Foot for MakerFarm Prusa i3 Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slightly modified version of clough42's version giving a little more support for both single wall and double wall…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A slightly modified version of clough42's version giving a little more support for both single wall and double wall thickness of the MakerFarm Prusa i3 and i3v. Completely redrawn in SketchUp, source files attached.
Uses these sorbothane isolator from Amazon.
Instructions
Printed parts with .2mm layer height and 100% infill.
Older Generation i3: Print 4 double mounts for front and rear y mount plates and 2 single mounts for behind z motors.
Newer Generation i3v: Print 6 single mounts; 2 each front and back y plates, and 1 each behind z motors.
Attach sorbothane isolator to mounts and attach to printer.
Category: 3D Printer Parts