1 / 9
Universal Fresh Dog Food Portion Cutter (Fits The Farmer's Dog & More) — zdjęcie 1
1 / 9

Universal Fresh Dog Food Portion Cutter (Fits The Farmer's Dog & More)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An 8-pack portion grid cutter designed for fresh/frozen pet food. Fits Farmer's Dog Food and similarly sized packaging.

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

🐾 Universal Fresh Dog Food Portion Cutter (Fits The Farmer's Dog & More)

Stop guessing or wrestling with messy knives to portion out your pet's fresh food. This functional 3D printable grid is custom-tailored to perfectly section a standard pack of The Farmer's Dog food into 8, easy-to-manage portions in one single press.

The model features an engineered, reinforced center palm-press pad to give you extra stability when slicing through partially frozen food, with specialized tapered blades that stay sharp without losing rigidity.

📖 Instructions for Use

  1. Thaw Partially: Take the fresh food pack out of the freezer and let it partially thaw. It cuts cleanest when it is still firm and slightly frozen in the center, which keeps the cubes from falling apart when moving them.

  2. Prep the Roll: Place the food pack on a clean cutting board. Use food-safe kitchen shears to cut off both plastic end clips, then slice the plastic straight down the center seam to expose the food fully.

  3. Align & Press: Position the cutter sharp-side-down directly over the food roll.

  4. Cut: Place your palm on the reinforced center square and press firmly straight down. Wiggle the cutter slightly side-to-side (like a cookie cutter) to ensure it slices completely through to the cutting board.

  5. Transfer & Store: Lift the cutter and use a kitchen spatula to effortlessly lift the perfect squares into your preferred refrigerated meal prep container.

  6. Clean Up: Hand wash only with cool, soapy water. Be mindful of the tapered blade edges while washing.

🛠 Print Settings & Configuration

This model prints beautifully with standard configurations and does not require complex tuning.

  • Printer Used: QIDI Q2

  • Slicer: QIDI Print (Standard Slicer)

  • Profile: Standard Print Profile

  • Filament Material: PLA (Note: Hand-wash only, do not expose to hot dishwasher temperatures).

  • Nozzle Diameter: 0.4 mm

  • Supports: None required (design prints flat face-down without overhang issues).

⚠ Food Safety Note: This is a functional model intended for brief contact with cold/partially frozen dog food before immediate transfer to a storage container. Because 3D prints have microscopic layer lines that can trap organic material over time, please hand-wash thoroughly with soap immediately after each use. If you intend to use this long-term, printing in PETG or coating the final print in a food-safe epoxy is highly recommended.

📐 Compatibility & Dimensions

While originally designed perfectly around a standard frozen **The Farmer's Dog** food pack, this universal model is fully compatible with any fresh or frozen dog food brand that utilizes similar loaf/roll/pack plastic packaging. 

To verify if this cutter fits your preferred pet food brand, the internal cutting area of the grid accommodates food packs up to these maximum dimensions:

Total Length: 252.00 mm (approx. 9.92 inches)
Total Width: 113.21 mm (approx. 4.46 inches)
Total Tool Depth: 52.00 mm (approx. 2.05 inches)
Maximum Cutting Clearance/Depth: 39.00 mm (approx. 1.54 inches)
(Note: The top 13.00 mm / 0.51 inches is dedicated to the reinforced center palm-pressure stability columns).

Tagi