Leifrotto VP-110 / VS15 Quick Release Camera Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Leifrotto quick release replacement. Designed after no replacements could be found.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
Leifrotto VP-110 / VS15 Quick Release Camera Plate
I created this replacement quick-release camera plate because I needed an additional plate for my Leifrotto fluid head, but unfortunately Leifrotto does not appear to sell additional or replacement quick-release plates for this particular tripod head.
After doing extensive online searches for an original replacement, compatible alternative, or an existing 3D model, I was unable to find anything that properly matched the original plate. Rather than replacing an otherwise perfectly usable fluid head, I decided to design and 3D print my own replacement plate.
The model was carefully developed through multiple test prints and adjustments to reproduce the important dimensions and locking geometry of the original plate. Particular attention was given to the angled dovetail sides, underside locking geometry, camera mounting screw channel, and recessed area that allows the mounting screw to slide for proper camera positioning.
My final test plate was printed on an Elegoo Neptune 4 Pro using Polymaker PolyMax PC (polycarbonate) for its strength, rigidity, and durability.
Settings Print Temp (260 c)
Bed Temp (105 c)
Print speed (50 mm)
Print orientation Vertical
Infill (100)
Wall line count (4)
Cooling Fan (Off)
Support Yes (Normal)
Build Plate Adhesion (Raft)
Important Note
This is a user-designed replacement part and is not an official Leifrotto product. Because this plate supports potentially expensive camera equipment, I strongly recommend performing your own fit and strength testing before mounting a camera. Print quality, material, orientation, and slicer settings can significantly affect the strength of the finished part.
I created this model because I couldn't find a replacement anywhere, and I'm sharing it in hopes that it can help other Leifrotto fluid-head owners who find themselves in the same situation.
If you successfully print and use the plate, I'd love to hear about your results and any improvements you make to the design.