1 / 1
Mag Caddy 50 | MC50 | An AR Magazine Organizer for .50Cal Ammo Cans — zdjęcie 1

Mag Caddy 50 | MC50 | An AR Magazine Organizer for .50Cal Ammo Cans

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The MC 50 is an insert for Harbor Freight .50 Caliber ammo cans to store AR magazines in an upright orientation.

Ocena
0 / 5
Polubienia
6
Pobrania
35
Wydruki
0
Wyświetlenia
182
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Just a very basic insert to help store/organize ar-15 magazines in .50cal ammo cans. This was made because I didn't want to pay the $45 for a premade solution or $30 for a foam insert. I only have Harbor Freight .50cal cans so I cannot attest to fitment in other brands. Holds 15 magazines, but the 3 slots in the center column will not work with 30rd mags due to hitting the lid's ribbing. You can either shave down the ribbing or just specifically only use lower capacity mags there. The horizontal slot in the front will have the same issue; although my intention for that slot was to have a place to put your extra dust covers. This solution will rattle because slot is purposely over-sized / loose so that PMAGs with dust covers attached will fit. Every other brand I own has smaller dust covers so compatibility should be good, although obviously I cannot to attest to literally every potential magazine on the market. If you want a firm/tight storage solution I'd advise looking elsewhere.

Is there room for improvement? Probably. I had bounced back and forth between the idea of adding a floor with some hands so that everything could be lifted out but eventually decided against it to save filament since I didn't think I'd ever end up using such a feature. If there is demand then I could go back and add that, or just remix the model if you don't want to wait for me to check for messages on Printables. It'd be an easy change.

Tagi