Midea Portasplit Door Mount - Hoppe Sliding Doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sliding door mount for the the Midea PortaSplit hose to the outdoor unit
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Open Community License v1.1 + Research & Development v1
This is a door mount for your Midea PortaSplit designed specifically for the Hoppe sliding doors often found in German “Neubau” apartments.
Fits the bottom sliding contour perfectly and is held in place strongly by the two pins that come out from the door frame to which the sliding door normally closes. The width of the mount is just enough to allow the door to reach it's automatic closing position so it will still auto-close cleanly on this mount.
See the photos of the top/bottom rail to be sure you've got the same or a similar one. You can just grab the top / bottom .step file and slice off the end to double check if you aren't sure.