Minifig Display Inserts – EuroPlus Basic 18/9
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert set for Brick Figures (Minifigs) that fit into the common EuroPlus Basic 18/9 boxes.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Insert set for Brick Figures (Minifigs) that fit into the common EuroPlus Basic 18/9 boxes. They let you mount figures with 2-stud spacing and attach a 1x3 tile (e.g. this model) with your own labeling in the front row. They're designed so the inserts shouldn't tip over when lying flat.
The parts are numbered on the underside, indicating their position in the box (1–9). One part needs to be printed 4x (positions 1, 3, 4, and 6), another 2x (positions 2 and 5). The rest once each. Part 7, 8, and 9 need support.
Printed on my Core One+ with a 0.2 mm nozzle and PETG (10% infill), the stands hold the bricks firmly.
Please note that the design was created entirely with the help of nurb in combination with Claude Opus 5. The inserts for positions 7 and 9 could probably fit a bit more precisely, but I couldn't quite get them there — apologies for that.
Update 2026-09-22: adjusted stud diameter slightly; added variants for stands without first row (name plate) and an additional stud in the last row for accessories