KCD Modular Score Counter for Farkles

🎲🏰🎰 About KCD Score Counter 🎰🏰🎲

Add a tactile, pseudo-mechanical element to your tabletop tavern with this segmented score counter. Perfect for keeping track of the tens of thousands of points you'll amass in Kingdom Come: Deliverance's Farkle game, this five-wheel (or even more) barrel counter allows for precise recording from simple throws to legendary streaks. Both end caps proudly feature the iconic KCD emblem, making it a thematic and functional companion piece to the Farkle Cup (KCD cup also available on my profile!). Never lose track of your winnings, and praise Henry!

📐 Adjustable Digit System

If you want even more digits, like 6,7.. you can easily extend the stem in the slicer. First, don't forget to unlock the changes (so you extend only in the Z-axis!). Next, add an additional +10mm for height in the Z-axis for every new ring you wanna add (so for 6 digits to fit the model must have 70mm overall; for 7 digits it must have 80mm and so on..). See pictures below.

🔧 Available Modules

• KCD-themed left cover side

• KCD-themed right side

• Longer stem for 5 digits (or you can extend it in the slicer for more!)

• Standard ring in "Old English" font

• Doubled "50-00" ring for KCD game rules

🛠  Print settings

• Material: PLA is enough, but PETG is a safer pick there (for the stem and rings, definitely) 

• Layer height: 0,2mm works just fine

• Nozzle diameter: 0,4mm 

• Infill: 15% for both PLA and PETG with Gyroid infill

• Supports: NO for all parts

• Brim: NO

• Orientation: Turn all pieces and print them sideways!

• Assembly: YES, but simple

⚙ Assembly

1. Take the stem and with gentle pressure, fit it into the left or right side

2. Put as many standard rings as you want

3. Put on the very end a doubled "50-00" ring

4. Use the unused left or right side and secure the whole model with it (apply gentle pressure, but make sure everything is tight side-by-side)

5. Count, roll, but most importantly enjoy your game!

🎰 Using KCD Score Counter🎰

Simple to use. Turn the rings as you want (up or down) as your game goes! No matter if you add or subtract points.

⚠ Safety & Material

This model is perfectly suited for standard PLA. However, for a more authentic, rustic tavern look, I highly recommend using a Wood-filled PLA filament. Both materials are non-toxic, beginner-friendly, and yield great details.

Just a quick reminder regarding PLA: it can warp under high temperatures. Be sure to keep your printed cup away from prolonged direct sunlight or hot environments (like a parked car during summer). Please note that this is a gaming prop intended only for rolling dice, not for food or drinks!

💡 Feedback & Improvements

If you are missing an extension or you have any ideas for new ones, improvements, or alternative uses, feel free to share them in the comments. Feedback, suggestions, and your own remixes are always welcome!

I will upload updates and improvements as soon as there are some good ideas or tested variants by me or someone else! :)

Updates

No updates yet!