1 / 5
Spider-Man Desk Display — Pannello Decorativo a Strati (fan made) — zdjęcie 1
1 / 5

Spider-Man Desk Display — Pannello Decorativo a Strati (fan made)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pannello a strati con ragnatela in rilievo e ragno separato: tre colori, effetto tridimensionale, 4 ore di stampa.

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

compact wall-art style decorative panel designed for a desk, shelf, gaming setup, or workstation. Fan-made, unofficial model.

LAYERED DESIGN

The model uses three colors to create depth: black for the rear layer and base; red for the background panel, with specially designed slots to accommodate the web; blue for the raised web, which protrudes approximately 2 mm from the background; and black again for the spider, a separate piece placed on top of the composition as the main focal point.

The combination of recessed areas, the raised web, and the separate spider creates a strong three-dimensional effect while keeping the model simple to print. It looks especially striking with ambient lighting behind or around it.

ACTUAL PRINT DATA (0.4 mm nozzle, PETG)

Plate 1, spider and web: 1h 28m, 9.6 g, 1 filament change, supports required.

Plate 2, background panel: 2h 29m, 32.8 g, 3 filament changes.

Total: approximately 4 hours and 42 g of material.

Profile used: 0.12 mm High Quality, 2 walls, 15% infill. The 0.12 mm layer height is not just for show: on the raised web and around the edges of the spider, a thicker layer height tends to blur the finer details and reduces the layered effect.

FILES

Both a pre-configured multicolor 3MF, ready to open and print, and separate STL files (spider, web, panel, and stand) are included for those who prefer to assign colors manually or print using manual filament changes.

Filament colors: black / red / blue.

License: CC BY-NC-SA — free to download, print, and remix for personal use only. No commercial use.

If you print it, share your version — we'd love to see it.

Pannello decorativo compatto in stile arte da parete, pensato per scrivania, mensola, postazione da gioco o workstation. Modello fan made, non ufficiale.

DESIGN A STRATI

Il modello sfrutta tre colori per costruire la profondità: nero per lo strato posteriore e la base; rosso per il pannello di sfondo, con le fessure ricavate apposta per accogliere la ragnatela; blu per la ragnatela in rilievo, che sporge di circa 2 mm dallo sfondo; nero di nuovo per il ragno, un pezzo separato appoggiato sopra la composizione come punto focale.

La combinazione tra aree incassate, ragnatela in rilievo e ragno staccato dà un effetto tridimensionale netto pur restando un modello semplice da stampare. Con una luce ambientale dietro o intorno rende particolarmente bene.

DATI DI STAMPA REALI (ugello 0.4, PETG)

Piatto 1, ragno e ragnatela: 1h 28m, 9,6 g, 1 cambio filamento, richiede supporti.

Piatto 2, pannello di fondo: 2h 29m, 32,8 g, 3 cambi filamento.

Totale: circa 4 ore e 42 g di materiale.

Profilo usato: 0.12 mm high quality, 2 perimetri, 15% di riempimento. Lo 0.12 non è un vezzo: sulla ragnatela in rilievo e sui bordi del ragno uno strato più grosso impasta il dettaglio e l'effetto a strati si perde.

FILE

Trovi sia il 3MF multicolore già impostato, pronto da aprire e stampare, sia gli STL separati (ragno, ragnatela, tela, gamba) per chi preferisce assegnare i colori a mano o stampare con cambio manuale del filamento.

Colori filamento: nero / rosso / blu.

Licenza CC BY-NC-SA: scaricabile, stampabile e remixabile liberamente per uso personale, nessun uso commerciale.

Se lo stampi, condividi la tua versione: ci fa piacere vederla.

Tagi