1 / 2
Adaptor to fit SKR 1.4 or 2 into a CR10 V2 or V3 — zdjęcie 1
1 / 2

Adaptor to fit SKR 1.4 or 2 into a CR10 V2 or V3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my adapter I made for my CR10 V3 to put a SKR v1.4 board inside the case. It may work with more than the SKR…

Ocena
0 / 5
Polubienia
1
Pobrania
23
Wydruki
0
Wyświetlenia
242
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is my adapter I made for my CR10 V3 to put a SKR v1.4 board inside the case.

It may work with more than the SKR 1.4 or SKR 2, if you find out that it does I'd love to know

The through holes of a constant size are for threaded inserts (linked below)

The through holes that have a step are for bolting the adapter to the mounts that exist inside the case already. I'd also recommend putting electrically non-conductive tape over the bolt heads after screwing the mount down. They don't contact the board when the printing tolerances are correct, but it's better safe than to have a fire.

I designed this in such a strange way to minimize material usage and time to print.

Threaded inserts: https://www.amazon.com/gp/product/B077CJV3Z9

Category: 3D Printer Parts

Tagi