The ToeBox (Print In Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A completely normal box that flips out a pair of feet when you lift it up! Locks open or closed, and is Print In Place!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Introducing the ToeBox!
The ToeBox is a 50mm cube that looks perfectly normal on the outside aside from a face on the front, but then when you lift it up, the inside slides out and two Feet each with five Toes flop out, ready to face the world.

Features:
Fully print in place
only ~48 grams of filament
Two feet, ten toes
Discreet and normal box, until it's not
Satisfying sliding action
Compact yet "elegant"
A lock on the bottom to keep the box either closed or open, toes on display
Generous tolerances and a smart design for easy printing with any printer(probably?)
7 different faces to choose from for your ToeBox(Happy, Happy2, Shocked, Shocked2, Sad, Angry, and Moustache)
Two different toe types, Smooth and Pointy(I prefer the smooth toes though)
People don't expect a cube to have toes, but this is your chance to prove them wrong.
Printing:
Use 2 wall lines and 0% infill or use 30% Lightning infill for a smoother top surface. (With no infill, some printers may get slight bumps on the top. Infill isn’t needed for strength — only for top‑surface support if your printer needs it)
0.2mm layer height and a 0.4mm nozzle work fine, use whatever you want
No Supports
Takes about 50 grams of filament
I used PLA, but use whatever material you want
Have the order of walls print the Outer wall first for best print quality (Order of walls- Outer/Inner in Bambu Studio, Wall ordering- Outside to Inside in Cura)
Makes and Reviews are highly appreciated!
How to use your ToeBox:
After printing the inner box should simply fall down and the toes should automatically flip down with gravity when picked up, but if not use force to free up the parts and kind of grind them against each other to wear them in for smoother motion.
The ToeBox works with just gravity! simply place your ToeBox on a flat surface while holding the bottom closed, then lift up by the outer box until the inner box is fully extended and the toes should fall down on their own! Then, lower the outer box on top of the feet and it will keep it slightly raised, meaning your ToeBox is now in the "opened" position! To close your ToeBox, pick it up again and allow the inner box to slide out all the way, then while holding it open, tilt the box back so the feet flop back into the inner box. Then, let go of the inner box while holding it upside down and it will slide back inside, hiding the toes inside forever :( (or until you open it again)
The ToeBox has a lock! On the bottom of the ToeBox you will notice a screw like hole, and by turning it so it's horizontal, you can lock the ToeBox! It can lock the ToeBox in either the fully closed position, so the toes don't reveal themselves when you don't want them to, or in the opened position, so the toes stay on full display forever! The lock has slightly tighter tolerances than the rest of the ToeBox, so you may need to apply some force to break it free. Use pliers if needed. It is meant to turn, but not pull out.