Endoscope Mount for CR10 V2 and V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a endoscope mount for a CR10 V2 or V3. It works for endoscopes that have a diameter of 8.5mm. It is secured…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a endoscope mount for a CR10 V2 or V3.
It works for endoscopes that have a diameter of 8.5mm.
It is secured via zip ties to the fan grill, and the endoscope is secured via zip ties. Personally I use 4 for the endoscope to secure it and 4 to mount it to the grill.
This is the fifth version I've designed and the first that has the necessary stability to hold the endoscope still during printing.
Print with the small side down.
Print Settings
Printer:
Creality CR10 V3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.24
Infill:
20
Filament:
Overture PETG
Grey
Notes:
Print with PETG or something else temperature tolerant. It won't survive made of PLA.
Category: 3D Printer Accessories