Quadruple Disc Enclosure with 120 fan Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A practical 3.5inch disc enclosure When building my NAS extension I wanted an easy way to extend capacity while…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 563
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A practical 3.5inch disc enclosure
When building my NAS extension I wanted an easy way to extend capacity while maintaining
the external option, having the discs together with a fixed fan mounting point makes it easy to put the box anywhere I want within reach of the (longer) Sata cables
I printed them in PLA on the Prusa I3MKS3 at 100mm/s , print times around 12 hrs, no support needed.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
10
Filament: any PLA any
Notes:
print as fast as you want, I used 2 walls, 3 top and bottom
if you print on the right hand side (end of the enclosure when sliding in the discs) you will not need supportsPost-Printing
if stringing occurs, either cut or blow away
Category: Computer