Piranha Tensile Tester - An Open Source Tensile Testing Platform
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An open source, cheap, and simple tensile testing machine that runs G-Code.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Open Community License v1.1 + General Attribution v1
An open source, cheap, and simple tensile testing machine that runs G-Code. The goal behind this project is to make an affordable device for education purposes for tensile testing to showcase materials science to students and/or obtain a cursory understanding of material properties from doing your own basic materials tests. It also allows for full logging of data and is very customisable, being based around an Arduino UNO. It is capable of testing up to 1000N (unlocked) or 900N (safety factor in software).
For full details, please see the documentation pdf. This page has all the part files for the device as well as some documentation on the design for you to build your own. The code and PCB design files for the device are over on GitHub so you can head over there for those. I'd start by reading the documentation pdf before proceeding any further. That tells you everything you need to know. If you're looking for compiled code files, those are also on GitHub under releases. I'll post compiled firmware binaries, installers for the software, and gerber files for ordering your own boards there.
For print settings, see the pdf for specifics or take a look at the attached PrusaSlicer 3mf project files. The gist of it is that all parts will need at least 4 walls and can be printed in PLA using 15% cubic infill. The jaws in particular though up this a bit for extra strength.
Note that anything provided here is without warranty, but I'll be happy to address feature requests, issues, and such if this does get popular. Note that the code and everything in the repo is licenced under GPL while the CAD files here on Printables are licensed under OCL for this project.
One final note, the optional part provided here as "Arduino Power Plug" was re-used from this link. It was made by makenai and is licenced under CC-BY-NA. This is the only part licenced as such and is not my own, the rest of the work is licenced as described above. I'm noting this to provide attribution as though this isn't a remix of that part, it does re-use that alone as an optional part.
The models for this project were created using Fusion 360.