Yet ANOTHER Machine Vise
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A robust, fully 3D-printable machine vise that snaps together without additional hardware.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 2
- Wyświetlenia
- 140
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A robust machine vise designed to be fully 3D printed. The eight parts clip and snap together, so no screws or other hardware are required for assembly.
The original creator recommends three shell layers, 35% infill, and 0.15 mm layer height, with 0.10 mm layers as an option for the threaded parts. It was printed with a 0.4 mm nozzle and requires no supports. Since the clamping forces are carried primarily by the outer surfaces, additional infill is not expected to add much strength.
Originally designed by TheGoofy and published on Thingiverse: