1 / 8
92mm to 120mm fan bracket Dell XPS 8940 Desktop PC — zdjęcie 1
1 / 8

92mm to 120mm fan bracket Dell XPS 8940 Desktop PC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This 92mm to 120mm fan bracket allows you to install a 120mm AIO CPU liquid cooler inside the Dell XPS 8940 MT.

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

Overview This custom 3D printable bracket lets you mount a 120mm fan or radiator to the stock 92mm fan mounting points inside your Dell case. It is designed to maximize airflow and help you fit liquid cooling or upgraded fans into tight workstation layouts.

Print Settings

  • Material: Any (PLA, PETG, ABS, ASA)

  • Infill: 100% (recommended for structural strength)

  • Supports: No supports needed

Installation

  • Mount the adapter using your original Dell stock fan screws.

  • The screw holes are designed to self-tap directly into the plastic—no extra threaded inserts or nuts required.

Terms of Use

  • Strictly for personal, non-commercial use.

  • Re-selling, redistributing, or sharing the STL files is prohibited.

  • Selling physical 3D-printed parts made from this design is strictly forbidden.

Disclaimer & Agreement This file is provided "as is" without any warranty, technical support, or guarantees. By downloading and printing this file, you assume full responsibility for your own hardware, assembly process, and system modifications.

Important Clearance Note Due to the extremely limited interior space inside the Dell case, using a thick AIO pump head or radiator combo may prevent the side panel from closing properly. We strongly recommend selecting a low-profile, thin AIO pump for optimal clearance and an easier installation process.

Tagi