3DFx Voodoo 3 3000 Noctua Fan Mount - xDone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned Voodoo 3 3000 mount for two NF-A4x10 fans. Uses stock Noctua screws; stronger, easier print.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Remix of the 3DFx Voodoo 3 3000 Noctua fan mount. Same idea — a dual Noctua NF-A4x10 slide-on cooler for the Voodoo 3 3000 — but the mounting and the shell are designed from scratch.
Fastening uses the stock Noctua screws: 4 from the top and 4 from the bottom. No extra hardware.
The enclosure is stiffer and prints cleaner, with less support and a better surface.
Print settings used (photos)
Printer: Prusa MK4S + MMU3, 0.4 mm nozzle
Material: Prusament PETG
Profile: 0.20 mm STRUCTURAL
Perimeters: 3
Infill: 15% gyroid
Supports: automatic organic
Overhang threshold: 30°
Style: Organic
Pattern spacing: 2.5 mm
Interface pattern spacing: 0.3 mm
On build plate only
Support material speed: 50 mm/s
Post-processing is minimal. Light sanding where supports touch the clip/join areas is normal.