1 / 6
Equine Asthma Inhalation Mask (for Intec Turbo Mesh Portable Nebulizer) — zdjęcie 1
1 / 6

Equine Asthma Inhalation Mask (for Intec Turbo Mesh Portable Nebulizer)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D-printable custom inhalation mask for horses suffering from asthma, designed specifically to fit the Intec Turbo Mes

Ocena
0 / 5
Polubienia
3
Pobrania
50
Wydruki
0
Wyświetlenia
279
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Attribution — Share Alike

Just like humans, horses can suffer from respiratory diseases such as equine asthma. One of the most effective daily therapies is nebulization/inhalation. Thanks to 3D printing, we can design custom masks tailored to equine anatomy and specific therapeutic needs.

This mask is designed to mount the Intec Turbo Mesh portable, battery-powered nebulizer. Going wireless eliminates hanging cables, tubes, and stationary compressors, giving the horse complete freedom of movement.

Why walk during inhalation? Administering the treatment while walking the horse stimulates deeper, more rhythmic breathing. This significantly increases inhalation efficiency, allowing the aerosolized medication to penetrate deeper into the lower respiratory tract for superior therapeutic results.

Key Features:

  • Direct fit: Tailored connector port for the Intec Turbo Mesh nebulizer.

  • Breathing vents: Integrated honeycomb exhaust/intake holes to ensure proper airflow and prevent pressure buildup.

  • Strap mounting slots: Built-in side slots for securing straps around the horse's head or directly to a halter.

  • Mobility-focused: Robust, lightweight design intended for active walking therapy.

Print Settings & Recommendations:

  • Filament: PETG (Recommended for good impact strength, chemical/medicine resistance, and easy cleaning/disinfection. TPU is also an option for a softer contact surface).

  • Perimeters / Walls: 4 – 5 (Essential for structural durability and rigidity against horse movement).

  • Supports: Yes (Required for the overhangs at the inhaler mounting port and underside curves; organic/tree supports work best).

  • Infill: 15–20% (Gyroid or Grid).

  • Comfort Tip: Make sure to lightly sand the rim or attach a soft edge trim/foam strip along the contact area to prevent any chafing against the horse's muzzle.

Tagi