Aqara FP300 mount for IKEA VIDGA rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Aqara FP300 presence sensor in a room using your existing IKEA VIDGA curtain rails.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 1
- Wyświetlenia
- 86
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount your Aqara FP300 presence sensor in a room using your existing IKEA VIDGA curtain rails.
Slide it the VIDGA rails sideways and then turn 90° to lock it in. No need to remove the curtains. Mount the sensor itself by unscrewing it from the factory installed baseplate and mount it with the same screw on this VIDGA holder.
Ideally printed on the side for long-term stability, but then needs supports. It can be printed upright without supports by placing the piece that has the screw hole on the build plate.