1 / 3
Adjustable 2-Tier Stand for Two Toy Shotguns (Or Single) — zdjęcie 1
1 / 3

Adjustable 2-Tier Stand for Two Toy Shotguns (Or Single)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Compact display stand designed for two toy shotgun models.

Ocena
0 / 5
Polubienia
7
Pobrania
11
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Compact display stand designed for two toy shotgun models.

The stand consists of two separate adjustable side supports, so the distance between them can be changed depending on the length and balance of the models.

It has two open tiers:
Lower/front tier — for the sawed-off shotgun.
Upper/rear tier — for the longer shotgun.

Dimensions in the shown setup:
• Footprint: 280 × 144 mm
• Stand height: 166 mm
• Cradle opening: 56 mm at the top / 24 mm at the bottom
• Lower cradle bottom height: 82 mm
• Upper cradle bottom height: 142 mm

The models rest across both side supports, and the spacing between the supports can be adjusted.

This is a prototype design. The geometry has been checked, but final fit and stability may depend on your print tolerances and the exact toy model, so a test fit is recommended.
The shotgun shown in the photos is for demonstration purposes only and is not included with this download.
Original model: First

Second

Tagi