Project - My MMU3 Filament Spool Holder - Request from @Diego Gonzalez
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Showing my finished project. Under construction.... will add infos piece by piece...
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A steel rod carries the whole weight and holds everything together (diameter 10mm)
The shiney tubes on which the spools run on are from a hardware store, supposed to be table legs. (outer diam. 30mm, inner diam. 28mm)
The bearings are outer diam. 26x10x7mm, 6000 2RS
The endcaps from the rollers hold the bearings pressfit and are very fragile and can break when putting the bearings in. Thats why I printed them in PETG and made several spares of them, because a few got broken while pressing all together. Once you become it done, the construction is very stable.
The small rod is 5mm and fits all small holes. I changed the setup a few times, so you may see it differently positioned on the pictures. The thin rod mounted under the spools is what works for me best, and how I am going to keep it... For your needs there are several holes in the dividers, so you can place the thin rod where you want, or even route PTFE tubes through them...
I just added a higher endblock in case someone wants a free standing filament roller rack for setting on to a table or a shelf...
Some smaller parts may be still missing here, Ill try to get them in to here later.... Feel free to ast questions if something remains unclear...
under construction...