PolyDryer annealing stand, to soften your prints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand for annealing parts inside the Polydryer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand for annealing plastic parts inside your POLYDRYER drybox.
Like the original design, this mod features a dual chamber heat flow to improve the strength and stability of your 3D printed parts, by heat-treating them.
It features the following improvements :
Handles in the plate, for easier extraction allowing to quickly return the Polydryer to its traditional purpose after you are finished annealing. Unlike the original, no need for any special extraction tool.
Structural brackets in the tower base, for improved stability even without screwing the plate to the base. Unlike the original, M4 heat inserts and screws are optional, since the platform is already stable enough without them inside the Polydryer.
Always print this mod in a heat-resistant material, to avoid deformation of the structure itself.