GoPro/Blendr light mount for Bontrager Flare or Ion lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a quick-release Bontrager Flare (rear) or Ion (front) light onto a GoPro/Blendr compatible mount.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the excellent Blendr light mount by CinciJeff - functionally identical, remix just addresses some needs for supports.
The back mount (for attaching to a GoPro or Blendr mount) has been slightly adjusted to no longer need supports, but not compromise the range of adjustment.
I printed using 0.2mm layer height with a 4mm nozzle, set to 4 shells, and that makes all the parts that need to be strong come out solid.
For the locking tab, supports are necessary, and this can't be avoided, so I addressed this one of three ways:
Load the "Blendr light mount with supports" which includes designed-in supports for single-material printing. I've printed this one in PETG and the supports broke away with no drama at all.
Load the "Blendr light mount" and the "Blendr light mount contact supports" in a printer that can handle multi-material printing. Set the light mount to your primary material (eg PETG) and then the contact supports part to a dissimilar material (eg PLA) so the supports will break away due to the materials not bonding
Print the "Blendr light mount" and use supports in the slicer. The risk here is the slicer will try to support a bunch of places that do not need it. (see the screenshot for the extraneous supports)
Changes made from the original:
The mounting tabs have been set flat to the print bed with a 45 degree overhang which generally does not require supporting.
The thru-hole for the GoPro/Blendr mount has a small point to prevent the overhang at the top of the circular hole.
The mounting tabs have been tied together in between for a bit of extra strength.
Overhanging fillets (fillets facing down towards the print bed) were changed out for chamfers with fillets
The locking tab was thickened every so slightly so that it would print with 4 lines with a 0.4mm nozzle in PrusaSlicer or and Orca derivative.
The top slot above the locking tab was adjusted to not have overhangs