1 / 3
Kobra 3 Belted Z axis — zdjęcie 1
1 / 3

Kobra 3 Belted Z axis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mod for the kobra 3 that turns the lead screw z axis into a belt driven one!

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Allows the use of KevinAkaSam's belted z mod to be used on the kobra 3, replacing the lead screw

This site only has the models I modified please obtain the rest of the models from KevinAkaSam's website. You can also follow their instructions to install the mod as they are pretty similar https://kevinakasam.com/belt-driven-ender-3/

The standard axis holders have an issue that required the bottom belt holder to be glued to the bottom instead of just bolted in the place of the lead screw holders. I attached a beta axis holder that should allow you to bolt the bottom belt holder instead of gluing it but I have not tested them. If you go the beta route and find any issues or success please let me know

I recommend printing out of heat resistant material as well as a couple of extra walls for added strength

This mod needs extra hardware and KevinAkaSam provides links to the hardware on their site

Please be aware that it is a bit of a challenging mod so be careful and read instructions carefully

If you find any issues or need help please let me know I'll be happy to help :)

All the credit for the original mod and models goes to KevinAkaSam https://kevinakasam.com

Tagi