ATX powersupply end cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i didnt like to have all the extra wires from an ATX powersupply that i use for my 3d printer laying around, so i made…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
i didnt like to have all the extra wires from an ATX powersupply that i use for my 3d printer laying around, so i made an end cap that uses the screw holes on the ATX powersupply to hold it.
inside it is a peace of prototype PCB (100x40 mm) and i used 2x 8 screw-terminals for PCB, where i can put the wires i need.
I made a lable in word that i printed to fit the hole to see what is what. i added that as pdf (sorry for the single danish word)
the PCB is uses 4x M3 6 mm screws for mounting.
Category: 3D Printing