Levoit Core 300S Air Purifier cool Design Stand / Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Levoit Core 300S Air Purifier cool Design Stand / Holder for better air filtering
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This little marvel of technology has really improved the air quality in my room, and I don't want to take it out of the room anymore. Reason enough to give this device a stylish look and fit it with a proper stand. Not only does this make the Levoit Core 300S look better, but it also fits much better in any space. You can play with colors and add your own touch to the stand to match your furniture.
You will need:
Material in your desired color, e.g., PLA, and some superglue. Simply print four legs and the connector. Then slot everything together and secure the connection points with a little superglue. Done!
A little tip from me:
To achieve such a cool design in the legs, align them lying on their side in your slicer and set the first and last layers to 0. Make sure that the function is not activated so that you don't just have a wall line in the first and last layers. Now the infill is exposed. You can now play around with the infill pattern and density to add a cool factor to your design. However, you can also print the legs as normal, whichever you prefer.
If you liked it, leave me a “LIKE.”
PLA, PLA+, PETG, ABS
min. 4 Walls
Infill 5 - 20 %
support material only on legs (connector side)