Heart-shaped shelf hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a heart-shaped hook to allow the hanging of items from a 12 to 13mm thick shelf.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a heart-shaped hook to allow the hanging of items from a 12 to 13mm thick shelf.
If it's not a tight fit, then a strip of paper may be placed in the 'jaw' to not only protect the shelf finish, but to take up any slack.
I used ABS in my print, it's plenty strong enough to hang light items from.
There are two models; one plain, one with a 'A'. I've also included the FreeCAD file, so if you're feeling keen you can customise it yourself.
I'd really appreciate seeing any makes on this page!
Print instructions
Category: Organization Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.25
Infill: 10%
Notes:
You only need support under the hook, so you can close the spacing up to give good support.
How I Designed This
Designed with FreeCAD 0.16