Stand for the Mobile 3DMakerpro Scanner Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original 3DMakerpro handle stand (Seal, Seal Lite, Moose, Moose Lite, Fox)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Stand for the Mobile 3DMakerpro Scanner Handle
The original 3DMakerpro handle (3DMakerpro Seal, 3DMakerpro Seal Lite, 3DMakerpro Moose, 3DMakerpro Moose Lite, 3DMakerpro Fox) is a practical accessory for the mobile handheld scanner. However, the complete mobile scanning unit cannot be placed down safely and may easily tip over.
For this reason, I designed and 3D-printed a simple holder. The scanner handle is simply inserted into the stand, allowing the complete mobile unit to be placed down safely while remaining ready for use.
For additional grip, standard self-adhesive rubber pads with a maximum diameter of 10 mm can be attached to the bottom.
I printed the stand from PLA in my favorite color. The result is a simple, practical, and space-saving solution for everyday use with the mobile 3D scanner.
Advantages
Safely holds the complete mobile scanning unit
Simple and stable design
Non-slip base using optional rubber pads
Suitable for rubber pads up to 10 mm in diameter
Easy to print with PLA
No additional mounting hardware required
3D-Druckeinstellungen
Recommended Print Settings
Material: PLA
Layer height: 0.20 mm
Nozzle: 0.4 mm
Wall lines: 3
Infill: 15–20%
Nozzle temperature: 200–220 °C
Build plate temperature: 50–60 °C
Supports: Not required
Orientation: Print flat with the bottom side on the build plate