Designer Doberman Lamp – Low-Poly 3D Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 610 mm tall Designer Doberman Lamp in a modern low-poly style is a real eye-catcher for living rooms and more!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Designer Doberman Lamp – Low-Poly 3D Print
This 610 mm tall Designer Doberman Lamp in a modern low-poly style is a real eye-catcher for living rooms, offices, gaming setups, and creative workspaces.
Inside the head, there is space for an E14 LED bulb. When the lamp is switched on, the Doberman’s eyes light up like small spotlights, creating an impressive and unique lighting effect.
The model was designed specifically for 3D printing and consists of precisely fitting individual parts. Each part fits in only one position, making assembly simple and intuitive. The parts are plugged together and then permanently fixed with super glue.
To print all parts, a 3D printer with a minimum build volume of 300 × 300 × 300 mm is required.
The required E14 cable set with socket, switch, and plug can be purchased pre-assembled and inexpensively from many online shops or hardware stores.
Highlights
610 mm tall low-poly designer lamp
Glowing Doberman eyes with integrated E14 LED bulb
Modern geometric design
Easy assembly with unique plug-in connections
Parts are fixed with super glue
Minimum build volume: 300 × 300 × 300 mm
Compatible with pre-assembled E14 cable sets
Great decoration for living rooms, offices, gaming setups, and maker spaces
Additional Recommendations
For the best visual result, print the visible outer walls at a reduced speed, for example 40–50 mm/s outer wall speed.
Black parts can make layer lines more visible, so proper calibration of flow, temperature, and Z-offset is especially important.
Before final assembly, test-fit all plug connections without glue. Once everything fits correctly, apply a small amount of super glue and permanently connect the parts.
Lighting Recommendation
Use only a low-heat E14 LED bulb.
Do not use halogen bulbs, incandescent bulbs, or any other light sources that produce excessive heat, as they may damage the PLA parts.
Safety Notice / Electrical Installation Disclaimer
The installation and use of all electrical components is the sole responsibility of the builder/user.
This includes the lamp socket, power cable, inline switch, plug, LED bulb, wiring, insulation, and any related electrical parts.
Only use properly certified, pre-assembled electrical components that comply with the safety standards and regulations in your country.
Do not modify electrical components unless you are qualified to do so.
The designer/seller of this 3D model accepts no liability for damage, injury, malfunction, fire, electric shock, or any other consequences resulting from the installation, modification, or use of electrical components.
Use only low-heat E14 LED bulbs. Do not use halogen bulbs, incandescent bulbs, or any other light sources that produce excessive heat.
Assembly
Print all parts.
Remove supports if used.
Clean all plug-in connections.
Test-fit all parts without glue.
Insert the E14 cable set and LED bulb.
Glue the parts together with super glue.
Allow the glue to fully cure.
Switch on the lamp and enjoy the glowing Doberman eyes.
Important Notes
This is a 3D printable model.
Electrical components are not included.
Use only LED lighting.
Recommended for indoor use only.
The final result may vary depending on printer, filament, slicer settings, and assembly quality.
License / Usage
Please respect the license terms of this model.
Do not resell, redistribute, or share the digital files unless explicitly allowed by the license.
3D-Druckeinstellungen
Recommended Print Settings
Material: PLA or PLA+
Nozzle: 0.4 mm
Layer height: - 0.20 mm for good quality - 0.28 mm for faster printing
Wall lines: 3–4 perimeters
Top/Bottom layers: 4–5 layers
Infill: 10–15%
Infill pattern: Gyroid, Grid, or Cubic
PLA print temperature: 200–215 °C
Heated bed: 55–65 °C
Print speed: 45–60 mm/s
Cooling fan: 100% from layer 2–3
Supports: Only if necessary
Recommended supports: Tree Supports or Organic Supports
Support density: 10–15%
Brim: Recommended, especially for tall or narrow parts
Brim width: 5–8 mm
Seam position: Back side or “Sharpest Corner”
Orientation: Place parts with the largest possible contact surface on the build plate
