Radiator towl hook, Double panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy to hold large wet towel
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
Double Panel Radiator Towel Hook (80mm Gap / Type 22)
Practical, strong. and fashionable yet sensible.
A clean, modern towel hook engineered specifically for double-panel convector radiators (Type 22 / K2). Designed to fit modern radiators featuring deep 80 mm dual-panel depths and downward vertical pipe channels.
This hook spans comfortably across both panels to hang bath towels, hand towels, or robes directly in front of the radiator for quick drying without blocking heat flow.
Key Features
Custom Fit: Features an exact 80 mm gap clearance between the front and rear mounting lips to sit securely over double convector panels.
Optimized for Modern Radiators: Slips easily over radiators with top ventilation grilles or vertical channel profiles with downward piping.
Easy Print: 100% print-in-place with zero support structures required.
Recommended Print Settings
Print Orientation: Lay flat on its side for maximum strength (layer lines perpendicular to weight load).
Material:
PETG (Recommended): Best thermal resistance to withstand radiator heat over extended periods without warping or creeping.
PLA: Works great for low-to-medium temperature radiators (avoid running at maximum hot water temperatures).
Supports: None needed.
Layer Height: 0.20 mm or 0.28 mm (Draft).
Wall Loops / Perimeters: 3 to 4 walls for strength.
Infill: 20%–30% (Gyroid or Grid recommended).
Happy to help if you need me and please check out my other prints