Ted Nugent Name Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cat Scratch Fever! Print Ted Nugent's iconic slanted signature logo as a sharp, borderless 3D wall display plaque.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Turn up the Motor City Madman energy! This 3D wall display plaque captures the high-velocity, handwritten script signature of Ted Nugent—featuring its iconic forward-leaning slant and custom script styling.
This model is part of my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.
Dimensions
Width: 9.12”
Mounted Height (Slanted): 5.3262” (When displayed at its natural signature angle)
Actual Height: ~4.2629”
Thickness: 0.5625”
Trim Width: 0.1”
Text Inset Depth: 0.0625”
Mounting: Features (2) built-in keyhole slots on the back designed for #3 screws or small finish nails for a completely flush wall mount.
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the sweeping curves and sharp angles of the script).
Infill: 10% or higher (Gyroid or Grid patterns work great).
Supports: None required when printed flat on the bed.
Where It All Began:
Curious about the original hand-drawn concept art that inspired this whole series? Check out the model that started it all: